嵌套阵列最大似然估计测向算法

针对在辐射源个数未知的条件下嵌套阵列难以估计多个辐射源角度的问题,提出了基于最大似然估计(MLE)的嵌套阵列角度估计算法。算法在嵌套阵列模型的基础上,首先通过推导阵列截获多辐射源信号的最大似然函数及其梯度,利用最速下降法估计出空域中所有潜在辐射源的角度;然后,通过多元假设检验,利用最大似然比与门限进行比较,确定出空域中所有潜在辐射源中某一时刻发射信号的活跃辐射源角度,排除其余噪声形成的虚假辐射源角度,解决了在辐射源个数未知条件下嵌套阵列对多个辐射源角度估计问题。仿真结果表明:与传统多重信号分类(MUSIC)算法相比,该算法在辐射源数目未知、存在相干信号、低信噪比(SNR)、低快拍数条件下,均具有较好的角度估计精度,并且算法形成的虚拟阵列自由度是空间平滑MUSIC算法的2倍;多元假设检验法比传统信源数目估计算法在低信噪比条件下和处理相干信号方面具有明显优势。     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

新舟60飞机起飞性能分析

从新舟60(MA60)的飞机飞行手册(AFM)和飞行机组操纵手册(FCOM)入手,分析了限制最大起飞重量的因素和起飞速度的选择方法,着重讨论了MA60最大起飞重量的限制因素,并以MA60从广汉至兰州的航线飞行为例分析了最大起飞重量和起飞速度的确定方法。     

基于区域热核不变量的SAR图像变化检测

快速精确地检测SAR图像的变化是SAR应用亟待解决的问题。针对这一问题,提出了基于区域热核不变量的SAR图像变化检测方法。该方法利用图上热核的特征,可以充分发挥图谱理论的优点,且计算简便、矩阵的扰动性小。通过模拟分析研究了热核的特征,并应用于实际SAR图像的变化检测。实验结果表明该方法可以快速精确地检测到变化区域,且其变化检测的精度要优于区域似然比检测方法。     

基于STLS的卫星质量质心在轨估计

提出了一种使用结构总体最小二乘(Structured Total Least Squares,STLS)进行卫星质量和质心参数在轨估计的方法。其相对于现有方法有三个优点:采用完整的动力学模型,考虑敏感器测量误差,估计模型中不包含误差很大的推力值。首先推导了卫星质量和质心参数的估计方程,将其化为STLS模型的形式,对该模型定义了质量质心参数的STLS估计,并使用结构总体最小范数(Structured Total Least Norm,STLN)算法进行具体求解。证明了当敏感器噪声为高斯分布时,该估计为极大似然估计。仿真结果验证了该STLS估计方法的有效性。     

基于最大熵法的捷联惯组历次测试数据验前分布研究

研究在验前信息贫乏的情况下,使用异源验前信息确定捷联惯性测量组合(简称捷联惯组)历次测试数据验前分布的方法.将熵的概念引入验前分布的研究中,研究了在小样本条件下通过最大熵法确定捷联惯组历次测试数据验前分布的方法.研究结果表明这种方法能够准确有效地揭示捷联惯组历次测试数据的统计特性,克服了验前信息不足带来的统计分析误差,有效的提高了统计分析的质量.     

基于粒子群优化的光伏阵列最大功率点跟踪法研究

光伏阵列在局部阴影条件下,出现反向雪崩效应,导致输出功率出现多个局部极大值点,此时常规的最大功率点跟踪（MPPT）失效。基于比较完善的光伏电池遮挡模型,对光伏阵列进行建模,验证其输出功率的多峰特性。提出一种基于粒子群优化算法（PSO）的多峰最大功率点跟踪方法,并积累粒子个体搜索经验,提高跟踪速度。仿真表明,当外界条件变化时,此方法可以快速跟踪光伏模块的最大功率,从而有效地利用能源。     

一种基于随机集的模糊观测的多目标跟踪算法

为解决目标数未知或随时间变化时模糊观测的多目标跟踪问题,将多目标状态和模糊 观测数据表示为随机集形式,利用模糊观测的似然函数融合模糊数据,建立了模糊观测的概 率假设密度(probability hypothesis density,PHD)粒子滤波方法。这种方法首先利用 粒子滤波预测和更新随机集的PHD,然后估计目标数N,最后找出N个PHD最大的点就 是多目标的状态估计。在相同的仿真环境中,用这种方法与用重心去模糊器进行去模糊处理 后的观测数据同时跟踪目标数变化情况下的多目标,并进行了比较,结果表明,模糊观测多 目标跟踪的PHD粒子滤波能稳健跟踪目标数未知或随时间变化时的目标状态和目标数,性能 好于去模糊情况。     

Solar signals in the minimum extreme temperature records in the southern region of the Gulf of Mexico

Minimum extreme temperature series from several meteorological stations of the Gulf of Mexico are spectrally analyzed using the Maximum Entropy Method.We obtained significant periodicities similar to those found in meteorological and solar activity phenomena. This indicates that probably the solar activity signals are present in the minimum extreme temperature records of this Mexican region.     

Optimum parameter matching obtained by experiments for coring drilling into lunar simulant

This paper performs a series of ground experiments (on the Earth) to obtain optimum parameter matching for a future core drill on the Moon. Three common stages, I, II, III, are recognized with respect to the cut per revolution (CPR), which is defined as the ratio between the feeding speed and the rotating speed. The optimum matching between the feeding speed and the rotating speed for drills locates at the boundary position between Stage II and Stage III, where the coring rate saturates and the weight on the bit and the driving torque are still low. Further data analysis of the ground experiments reveals that the optimum matching signifies a proportional relation between the maximum conveying rate (MCR) by the groove of the auger and its rotating speed. The kinetic analysis in an ideal condition without gravity, the friction from the auger groove and the pressure at the bit confirm a similar proportion. The correlation between the proportions needs further study to determine whether the optimum matching obtained on the ground can be directly applied to future drills on the Moon.